Enjoy this little fishing cartoon:

Woolly Buggers imitate lots of different trout food:
If you fish lakes, you should have lots of these in your box, with a mix of colors and sizes. They can also be effective in rivers.
Count-down-and-retrieve or slow retrieve. Vary the retrieve until you find what works best at the moment: slow and steady, fast, strip-and-pause, or quick, short two-inch strips. Also, wind-drifting works well in lakes.
Fish at all depths until you find the right one, but most of the time you should be fishing somewhere between two to six feet deep.
Video Tips
I found this great little article during my web surfing this morning and thought I would share it with my readers. I recommend reading the whole fishing and boating article here.
A good day on the water can be spoiled by a lack of ‘boat ramp etiquette’. This refers to someone who has insufficient consideration or understanding for other ramp users, isn’t prepared and takes too long to either launch or retrieve a vessel.
LAUNCHING
Prepare your boat before approaching the ramp. This includes loading all gear, checking fuel, removing tie-downs, fitting bungs, turning on battery switch, finding the key, etc. There is nothing more frustrating for other boat ramp users than watching someone drive onto the apron of the ramp and begin doing all the above jobs whilst everyone waits.
When you boat is completely ready to launch, get in line and wait for your turn to use the ramp.
Always check a boat ramp before reversing down it. Check for length of ramp, drop-offs, etc.
Carefully back down the ramp and get the boat in the water quickly and calmly.
When launching use a long rope secured to the bow to control the boat and clear other boats and trailers. On larger boats an additional rope on the stern will assist in windy or wash conditions.
Have someone on board to immediately start the boat and/or move it way from the ramp so the next person can proceed. Park your car and return to your waiting boat that has been moved away from the ramp (the sand or nearby jetty) is a good option.
RETRIEVING
Extra care and patience are needed when returning to the ramp at the end of the day. Tempers can fray easily after a day of sun and excitement. Children will be tired. Alcohol can cause unhelpful behaviour so try to stay calm and be as prepared as you possibly can.
Organise your gear whilst underway back to the ramp, not once you get there.
Approach slowly in congested areas for the safety of yourself and others.
Queue on a sandy beach if possible or make sure you identify who is before and after you. Honest mistakes can occur but good communication prevents unnecessary aggravation and “pushing-in”.
Unload passengers and have someone get the car and trailer and wait in the car queue until it is your turn, whilst you stay with the boat.
When it is your turn, move quickly and carefully to get the boat out of the water.
After retrieval, immediately move well away from the ramp before unloading gear and preparing the boat and trailer for the trip home.
Check tyres, lights, tie-downs, wheel bearings and couplings before leaving home and on arrival and departure at the ramp, also at any stops on the way (check bearings by touching the hub with the back of the hand - if too hot to touch - the bearing has failed).
As a quick check on the bearings, jack the trailer and spin the wheel. Any noise or roughness indicates trouble.
Fisher wearing a life jacket
The Rapala Knot is popular method to tie a lure to a line. It has the advantage of allowing the lures to move freely and unimpeded by the knot. It can be tied successfully in monofilament and fluorocarbon leaders.
If the bass does not hit on the fall, let the worm rest on the bottom for a brief period and then begin to retrieve the lure in a very slow, jerk and pause motion. Be careful to always keep a little tension on the line because learning this technique is a lot about learning to differentiate between the feel of the bottom and the feel of a fish. (wikipedia)
The shallow margin of a lake is often where all the food is located.
This is because the light penetrates the water easier in the shallower water, which is essential for aquatic weed growth. This thriving weed provides food and shelter for insects and small forage fish. So it makes sense for larger fish, such as trout, to hang about these areas during times of hunger or opportunity...
(This is a great article I found that I wanted to share with all my readers - a visit to the full article is recommended.)
When it comes to fly fishing for trout most people seem very happy when they are casting around the 12-15m mark. What happens when the fish are closer?
Short range fly casting is an essential part of a fly fisher's repertoire however; it seems this is an area most people get into trouble. Why?
First let's look at the rod loading. To load your fly rod for any given amount of line requires a varied rod arc according to the amount of fly line off the tip of the rod. Simply put, "the shorter the amount of line the shorter the rod arc".
If you "do less work you will achieve more"
The old adage of ten and two will apply for a given amount of fly line but definitely not all scenarios. This variation is also dictated by the design of your rod and the particular fly line you are using.
A cast of 10 metres (approx. 30ft) when using a 2.7m (9ft) rod and a standard length leader of 2.7m (9ft) then only requires 4.6m of fly line, roughly one & a half rod lengths. In this case try a much shorter back cast stroke and then push the rod tip out to above your target. Remember not to direct the rod to the water or your fly line will crash, aim above the water!.....
Sometimes, as the fish is lead to the net, it will suddenly find new strength and either swim off or change direction. Let it do so as trying to bully the fish with pressure that close to the boat will lead to many tears (trust me!)